THE MAIN PURPOSE OF HYDRAULIC STATION

use：

The hydraulic station is a hydraulic device composed of a drive motor, a hydraulic pump, an oil tank, a throttle valve, an overflow valve and other components. The flow direction, pressure and flow rate are supplied according to the drive requirements. It is suitable for each drive device machinery. This hydraulic system Various prescribed tasks can be realized. It was invented during the industrial revolution era and is now widely used in various industrial fields and automotive brakes.
 
The main function of the hydraulic station is to convert mechanical energy into hydraulic energy and provide many functions such as pressure, flow and direction control according to system requirements.

It is widely used in the fields of industry, construction machinery, marine shipbuilding, metallurgy, aviation and so on. It is one of the important equipment to ensure the safe operation of a mechanical device system. Its performance directly endangers the safe operation of the machine. If you are not careful, many safety accidents will occur.

Its main purposes are:
1. When working normally, provide different pressure oils for the sentence brake, so that the hoist can obtain different braking torques to ensure the normal operation of the machine;
2. Provide pressure for various wheel drives and lifting devices Oil and motive power;
3. In an emergency, it can achieve and brake to reduce the loss of the accident. The most effective use is in the emergency braking of the car;
4. When the accident is safely braked, it can achieve secondary braking , To ensure the normal operation of the machine, etc. Industrial hydraulic stations mainly include lifting hydraulic stations and transmission hydraulic stations, as well as brake hydraulic stations.
 
Simply put, the role of the hydraulic station is to transmit force. The hydraulic pump generates huge pressure, and realizes different motions through many transmission parts such as cylinders and pistons. There are upward power and translational power. It is closed, so it can generate huge power due to pressure. If it is not closed and a little leakage occurs, then its work will be greatly reduced, and the power will far fall short of the requirements of the machine. This will cause the machine to operate abnormally, and maintenance and repair will require huge costs. In daily work, pay attention to check its airtightness.